Speed Bumps Complete Kits 50mm 10mph & 75mm 5mph

Overview

50mm & 75mm Speed Bump Kits

Speed bumps are a great way to control the speed and flow of traffic. Our speed bumps kits are exceptionally easy to install and very cost effective. We supply everything that you need to complete the install including fixings, connectors and drill bit.

Why Choose our Speed Ramp Kits

Superior Quality

Our speed bumps are made from high-quality PVC which are tried and tested to withstand use by 44 tonne HGV's. Centre sections also come supplied with twin reflectors for increased visibility at night. The speed bumps are built to last, the yellow sections are moulded from yellow plastic rather than being a painted finish so expect a finish that will stay yellow rather than scrubbing to black after minimal use.

Quality Guarantee

We have been selling speed bump kits for many years. During this time we have refined not only the quality of the speed bump components but the fixings and installation kit. Our speed bumps are some of the best out there. They have been extensively tested and do the job without issue. We are one of the largest speed bump distributors in the UK, offering the best quality and the best prices.

Speed Bump Components

• Inner Section - The Inner is the main component within the speed bump kit, ours are made of part recycled PVC and are moulded either yellow or black.
• Shoulder Section - The Shoulder or End section finishes off the speed bump kit when being fitted. if you intend on running cables or pipes underneath the bumps then you will not be able to use Shoulders.
• Universal Fixing - Our universal fixing is designed to be a full proof fixing which works equally well whether being fixed into concrete or tarmac.
• Connector - Otherwise known as the 'Dogbone' this keeps the bumps together when they are being fitted.
• 16mm Drill Bit - The 16mm Drill bit is a high-quality drill which is to be used once the hole has been marked and pre-drilled. If being used with our Universal fixing we recommend drilling down 100mm which is the length of the plug.
• 10mm Drill Bit (optional) - We can supply our kits with a smaller drill bit to drill through the speed bump fixing points as they are sealed when made and to mark out and pre-drill the main fixing holes.
• Nut Driver (optional) - If you are fixing lots of speed bumps then we recommend using an Impact Driver or Drill to speed the process up when tightening up the fixings.

50mm Speed Hump Kits

The 50mm speed bump is by far the most popular choice of speed bump size in the UK. 50mm is the size that is used in most supermarket car parks, multi-storey car parks and on private roadways. For most circumstances, we recommend using the 50mm speed bump height over the 75mm height as the 75mm is often too aggressive for passenger cars and motorbikes.

Unit Height

Each section is 50mm tall, ideal for cars.

Cable Channel Depth 

The 50mm speed bump has a cable channel depth of 25mm.

Cable Channel Width

The cable channel width is 35mm on the 50mm speed bump.

Further dimensions and details of the 50mm speed bump kit can be seen below, along with our excellent installation guide video and pictorial guides.

75mm Speed Hump Kits

The 75mm Speed bump is the largest speed bump that we offer and is also typically the largest speed bump that you will find being used in the UK. The 75mm bump is designed to slow traffic down to just 5mph, with it mainly being aimed for use with HGVs. Larger vehicle wheels like the ones found on HGVs will not have to slow down that much for a 50mm bump so we recommend using the larger 75mm bump.

We have sold many 75mm kits to distribution centres where hundreds of lorries have been repeatedly going over these bumps and they stand up to the punishment well. If you are looking for smaller speed bumps for use with cars, then the 50mm kit will be more suited.

Unit Height

Each section is 75mm tall making them best suited to HGVs.

Cable Channel Depth 

The 75mm speed bump has a cable channel depth of 36mm.

Cable Channel Width

The cable channel width is 45mm on the 75mm speed bump.

75mm HGV Speed bumps are likely the best solution for those working in areas with many large vehicles passing through routinely. For further information on installing our ramps please look further down the page.

Inner Section

The inner speed bump section is 500mm long and 420mm wide.

Shoulder Section 

The shoulder section follows the inners being 420mm wide.

Yellow Stays Yellow

Quality yellow material surrounds the core of the ramp.

Our Own High-Quality Universal Tarmac and Concrete Fixing

We have our own fixing that is great for use on both tarmac (asphalt) and concrete surfaces. The fixing is hard wearing, and far easier to work with than traditional shield anchors and rubber nuts. The fixing works much like a traditional rawl plug, just supersized.

We have tested this fixing on many of our products and it is yet to fail, it is available separately if required for use with custom length kits or your own projects.